Mock Billing Definition | Law Insider (2024)

  • Balance billing means charging or collecting an amount in excess of the Medicaid, Medicare, or contracted reimbursem*nt rate for services covered under a Medicaid, Medicare or employer sponsored beneficiary’s plan. “Balance Billing” does not include charging or collecting deductibles or copayments and coinsurance required by the beneficiary’s plan.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-xxxx environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Billing involves the provision of appropriate usage data by one Telecommunications Carrier to another to facilitate Customer Billing with attendant acknowledgments and status reports. It also involves the exchange of information between Telecommunications Carriers to process claims and adjustments.

  • Net energy billing means a billing and metering practice under which a customer-generator is billed on the basis of net energy over the billing period.

  • Carrier Access Billing System (“CABS”) is the system which is defined in a document prepared under the direction of the Billing Committee of the OBF. The CABS document is published by Telcordia in Volumes 1, 1A, 2, 3, 3A, 4 and 5 as Special Reports SR-OPT-001868, SR-OPT-0011869, SR-OPT-001871, SR-OPT- 001872, SR-OPT-001873, SR-OPT-001874, and SR-OPT-001875, respectively, and contains the recommended guidelines for the billing of access and other connectivity services. Sprint’s carrier access billing system is its Carrier Access Support System (CASS). CASS mirrors the requirements of CABS.

  • Procurement Process means the process commenced by the issuing of this Invitation and concluding upon the award of a contract (or other outcome as determined by Tetra Tech International Development) or upon the earlier termination of the process

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • financial service supplier means any natural or juridical person of a Party wishing to supply or supplying financial services but the term “financial service supplier” does not include a public entity;

  • Freight forwarding services means the activity consisting of organising and monitoring shipment operations on behalf of shippers, through the acquisition of transport and related services, preparation of documentation and provision of business information.

  • MONTHLY KILOMETREAGE STATEMENT CUM BILL means the format specified by the Company.

  • Contract Monitor means the Department employee identified in Section 1.6 of the IFB as the Contract Monitor.

  • POS means point of sale.

  • Mail order pharmacy means a pharmacy licensed by this

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Detailed telecommunications billing service means an ancillary service of separately stating information pertaining to individual calls on a customer's billing statement.

  • NOC means National Olympic Committee.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Fifteen-minute billing unit means a billing unit that equals fifteen minutes of service delivery time or is greater or equal to eight minutes and less than or equal to twenty-two minutes of service delivery time.

  • processing aid means any substance not consumed as a food ingredient by itself, intentionally used in the processing of raw materials, foods or their ingredients, to fulfil a certain technological purpose during treatment or processing and which may result in the unintentional but technically unavoidable presence of residues of the substance or its derivatives in the final product, provided that these residues do not present any health risk and do not have any technological effect on the finished product;

  • Distribution Network Operator or “DSO” shall mean the operator of a Distribution Network.

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • Billing System means a system to issue Invoices relating to charges payable by each party under an Access Agreement;

  • PBX means Private Branch Exchange.

  • Pollbook means a record of the names of voters in the order that they appear to

  • Procurement item means an item of personal property, a technology, a service, or a construction project.

  • Database Management System (“DBMS”) is a computer process used to store, sort, manipulate and update the data required to provide Selective Routing and ALI.

  • Mock Billing Definition | Law Insider (2024)

    FAQs

    What is a mock billing? ›

    Mock Billing means a billing period statement provided to Owner prior to the implementation of Meter Rate billing, and is presented for informational purposes only.

    What is the legal definition of billing? ›

    Legal billing is the process of invoicing clients for legal services rendered. Law firms bill hourly, or may charge flat fees or contingency fees for their services.

    What are the two types of billing methods? ›

    There are three types of billing methods: time-based, usage-based, and feature-based. Time-based billing is the most common type, where the customer is billed based on the duration of the service. Usage-based billing charges the customer based on the amount of resources or bandwidth they use.

    What are the two most common types of medical billing? ›

    In addition, the way a facility handles medical records and billing can also differ. For people interested in becoming a medical biller, it's crucial to recognize that different types of medical billing exist. Healthcare providers may follow two types of medical billing: institutional and professional.

    What is the difference between billing and invoicing? ›

    An invoice and a bill are documents that convey the same information about the amount owing for the sale of products or services, but the term invoice is generally used by a business looking to collect money from its clients, whereas the term bill is used by the customer to refer to payments they owe suppliers for ...

    What is the difference between billing and payment? ›

    Billing involves the generation and issuance of invoices or statements, which communicate the amount owed by customers. Payment, on the other hand, refers to the settlement of those invoices. The separation of these processes provides clarity, transparency, and efficient financial management for businesses.

    What is an example of billing? ›

    Recurring billing usually involves setting up some kind of subscription with an automatic withdrawal from the customer's account on a prearranged date. Examples include gym memberships, subscription boxes, SaaS plans, and cloud storage plans.

    What is the difference between invoice and billings? ›

    Billing refers to the overall process of charging for services, whereas invoicing is specifically requesting payment for services provided. Integrating billing and invoicing systems improves data management and operational efficiency.

    What is the billing method known as? ›

    Billings method in British English

    noun. a natural method of birth control that involves examining the colour and viscosity of the cervical mucus to discover when ovulation is occurring. Also called: ovulation method, mucus method. Collins English Dictionary. Copyright © HarperCollins Publishers.

    What is an example of direct billing? ›

    One example is direct billing in the hotel industry for corporate travel. Here, it spares employees and providers from having to process payments on the spot. And it saves accounts receivables departments from having to separately reimburse employees.

    Top Articles
    Latest Posts
    Article information

    Author: Tish Haag

    Last Updated:

    Views: 6322

    Rating: 4.7 / 5 (47 voted)

    Reviews: 94% of readers found this page helpful

    Author information

    Name: Tish Haag

    Birthday: 1999-11-18

    Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

    Phone: +4215847628708

    Job: Internal Consulting Engineer

    Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

    Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.