Easy Tips and Tricks to Get Vinyl to Stick to Canvas (2024)

This post may contain affiliate links for your convenience. If you make a purchase through one of my links I will earn a small commission at no additional cost to you.

Last Updated on May 15, 2018 by Chris Butler

Have you been wondering how to get vinyl to stick to canvas? It can be tricky! In this post I will show you the tips and tricks I use to get vinyl to stick to canvas to create beautiful signs.

I just used these techniques last weekend while I was making a canvas for Easter. I applied the vinyl first and then painted the background. Here’s a little preview.

If you are interested in using my SVG design I have it available in my Resource Library. The details are available at the bottom of the post.

Let’s get to it and see how to get vinyl to stick to canvas.

Getting Vinyl to Stick to Canvas

Let’s talk about the vinyl first. Be sure to use Oracle 651 vinyl. This is a permanent adhesive vinyl and it really works the best for sticking to canvas or wood. Oracle 651 comes in a variety of colors, including glitter, so you will have lots of options with your design.

If you need more help with vinyl types, see my vinyl guide here.

Prepping the Canvas

Canvas is not a smooth surface. This is what makes it a bit of a challenge to get vinyl to stick to it. In order to combat that, we need to prep the surface of the canvas to make it smoother for vinyl adhesion.

There are three different methods you can use to do this.

The first way you can prep your canvas is by painting it. If you wanted to change the background color anyway, this is probably your best bet.

If you don’t want to paint, spray adhesive is your next option. Simply spray the entire surface of the canvas with your spray adhesive and let dry. After the adhesive is dry it will not feel sticky, but it adds a coating to the canvas to get that vinyl to stick better.

The third option is to use mod podge. Apply mod podge to your entire canvas and let dry.

I have tried all three, but mod podge is what I use most often. I always have it on hand, and I don’t have to go outside to spray anything.

Applying the Vinyl to the Canvas

Now that your canvas is prepped, we are ready to stick on the vinyl.

I do want to mention transfer paper really quick. I prefer to use clear contact paper to transfer my vinyl. Some of the transfer paper brands are entirely too sticky.The only exception to this is when you are using glitter vinyl, it needs a super sticky transfer paper.

Tip:Before you apply the contact paper to your vinyl, stick it to your clothes a few times to reduce the stickiness even more.

Before you put your vinyl design onto the canvas, grab a large hardback book.

One of the difficulties with getting the vinyl to stick is the canvas does not have a hard surface. We will be using a lot of pressure burnishing the vinyl. Placing a hard book under the canvas will give us the perfect firm surface we need.

Next, line up your design how you want it. Start at the center of your vinyl transfer and scrape out to the edges to prevent bubbles.

Now we really need to rub (also called burnishing) that vinyl onto the canvas. You can use your Cricut scraper, an old credit card, or even a tennis ball works really well (apply firm pressure while rolling it over your design)

After you’ve rubbed until you can’t rub anymore, it’s time to peel back the transfer paper.

Peel the paper back slowly at an angle. Your vinyl should be stuck without any problems!

Tips and Tricks if the Vinyl Still Won’t Stick

Every once in a while you will get a pain in the butt area. Maybe our base wasn’t applied enough in that area, or we didn’t rub quite hard enough there.

If this happens to you, lay the transfer paper back down in that spot and rub really hard over that letter again. Most of the time it will stick after that.

There are some fonts that stick better than others. The thick fonts that have more surface area will be easier to transfer.

The really thin, often the script fonts can be more difficult.

The script on this project did pretty decent. There was one area that decided to be a pain though.

And that was the thin little ‘I’ in Risen. If you encounter a thin letter that wants to come up with the transfer paper no matter how many times you rub, try using your Cricut Weeding Hook.

Use the hook to hold down the letter while pulling the transfer paper away. Press down on the vinyl letter with your finger after the transfer paper is off. The letter will stick fine after that.

Should I Seal the Vinyl Letters After They Are Transferred?

I do not seal my vinyl letters because Oracle recommends that you do not. It can distort and damage the vinyl.

That said I know plenty of people who do apply mod podge or polyacrylic over the vinyl letters without any problems. Just know it’s not recommended by the manufacturer.

So you see getting vinyl to stick to canvas doesn’t have to be frustrating at all! Just remember to prep your canvas, and use a hard book so you can apply firm pressure while burnishing. And if you do run into stubborn areas, now you know the tricks to work past them.

Here’s the pic again of my finished product. The vinyl transferred beautifully and will remain that way for many years to come.

Swipe My SVG Design File

Do you want to use my design for your project? You totally can! I keep all of my SVG files, plus plans and printables in my Free Resource Library

To get exclusive access, simply fill out the form below.

WANT TO SAVE THIS FOR LATER? BE SURE TO PIN THISVINYL ON CANVAS TIPS TO YOUR FAVORITE PINTEREST BOARD!

Related